.png){kind=logo}
SPD3303C Series Firmware Update
バージョン
V1.02.01.02.02R3
2023-11-28
バージョンの説明
1． Improved LED blinks
NOTES：
A. V2.0 hardware version of SPD3303C do not support rolling back to the previous firmware version
B. V1.0 hardware version of SPD3303C do not support upgrading to this version
C. Press and hold the "NO.1~5" button for 2 seconds, after releasing it, it will display H2.0, which is the V2.0 version hardware
NOTES：
A. V2.0 hardware version of SPD3303C do not support rolling back to the previous firmware version
B. V1.0 hardware version of SPD3303C do not support upgrading to this version
C. Press and hold the "NO.1~5" button for 2 seconds, after releasing it, it will display H2.0, which is the V2.0 version hardware
SPD3303C Series Firmware Update
バージョン
V1.02.01.02.02
2023-11-10
バージョンの説明
1. This firmware version only supports V2.0 hardware version of SPD3303C
Notes:
A. V2.0 hardware version of SPD3303C do not support rolling back to the previous firmware version
B. V1.0 hardware version of SPD3303C do not support upgrading to this version
C. Press and hold the "NO.1~5" button for 2 seconds, after releasing it, it will display H2.0, which is the V2.0 version hardware
2. Need to use P20 version EasyPower to upgrade this firmware
Notes:
A. V2.0 hardware version of SPD3303C do not support rolling back to the previous firmware version
B. V1.0 hardware version of SPD3303C do not support upgrading to this version
C. Press and hold the "NO.1~5" button for 2 seconds, after releasing it, it will display H2.0, which is the V2.0 version hardware
2. Need to use P20 version EasyPower to upgrade this firmware
SPD3303C Series Firmware Update
バージョン
V1.02.01.01.03R10
2023-11-10
バージョンの説明
1．Add the OCP function (Long push the current button (‘A’) get into or exit OCP function)
2．Some improvements about the USB’s stability.
3. Compatible new ADC
2．Some improvements about the USB’s stability.
3. Compatible new ADC
SPD3303C Series Firmware Update
バージョン
V1.02.01.01.03R6
2023-11-10
バージョンの説明
1．The buzzer abnormally sounds when the set value overranges
2．Changed the limit of series voltage to 60V
3．Fixed a bug of recall function.
2．Changed the limit of series voltage to 60V
3．Fixed a bug of recall function.
バージョンの説明
バージョンの説明
