.png){kind=logo}
SHS800X/SHS1000X Firmware Update
バージョン
V1.1.21R6
2024-10-16
バージョンの説明
1. Adapts to hardware version upgrades
SHS800X/SHS1000X Firmware Update
バージョン
V1.1.21R3
2023-11-10
バージョンの説明
1. Optimize the response of the universal knob
2. Optimize the selection strategy of the universal knob in level adjustment and displacement adjustment
3. Optimize the beep response time of the DMM continuity test
4. Optimize the response strategy of the shift button in recorder mode
5. Fixed several bugs
a) The horizontal and vertical displacement keys do not respond when they are short-pressed
b) File manager is not updated in time after the U disk is unplugged
c) Bugs under CAN decoding
d) Some bugs under the Navigate function
e) Offset adjusts the wrong channel bugs
f) Multimeter cannot reading small capacitance in the 40nf range
g) Wrong corner display after repeated version upgrades
h) Cannot enter the Meter using the SCPI command
i) Some help information description error
2. Optimize the selection strategy of the universal knob in level adjustment and displacement adjustment
3. Optimize the beep response time of the DMM continuity test
4. Optimize the response strategy of the shift button in recorder mode
5. Fixed several bugs
a) The horizontal and vertical displacement keys do not respond when they are short-pressed
b) File manager is not updated in time after the U disk is unplugged
c) Bugs under CAN decoding
d) Some bugs under the Navigate function
e) Offset adjusts the wrong channel bugs
f) Multimeter cannot reading small capacitance in the 40nf range
g) Wrong corner display after repeated version upgrades
h) Cannot enter the Meter using the SCPI command
i) Some help information description error
SHS800X/SHS1000X Firmware Update
バージョン
V1.1.20
2023-11-10
バージョンの説明
1. Optimize power consummation while enable the DMM
2. Optimize save/recall user’s interface’
3. Optimize ADC interleave noise on SHS1000X models
4. Optimize response of the horizontal and vertical position button
5. Support remote control by using EasyscopeX version P22
6. Fixed several bugs
a) User’s configuration not saved after power cycle’
b) Some display and control bugs under DMM
c) Device frozen while saving large CSV files to local memory
7. Some bugs in roll mode
2. Optimize save/recall user’s interface’
3. Optimize ADC interleave noise on SHS1000X models
4. Optimize response of the horizontal and vertical position button
5. Support remote control by using EasyscopeX version P22
6. Fixed several bugs
a) User’s configuration not saved after power cycle’
b) Some display and control bugs under DMM
c) Device frozen while saving large CSV files to local memory
7. Some bugs in roll mode
バージョンの説明
バージョンの説明
