.png){kind=logo}
SDS1xx4X-E Firmware Update
バージョン
V6.1.37R17
2024-06-28
バージョンの説明
1. Optimize Autosetup speed
2. Optimize SDS1104X-E bandwidth
3. Standard software functions of FG, LA and WIFI
2. Optimize SDS1104X-E bandwidth
3. Standard software functions of FG, LA and WIFI
SDS1202X-E Firmware (2-Channel Models)
バージョン
V1.3.27
2023-11-09
バージョンの説明
1. Fixed the bug: SCPI sets trigger level error when probe is 10X
2. Fixed the bug: SCPI(C4-C1:MEAD? FRR) is error
3. Optimized accessing USB drive so that when a USB drive is moved to a computer, Windows will not prompt a restoration of the USB drive.
4. Fixed the bug: CSV file does not consider probe
5. Fixed the bug of UART decoder with some special settings
6. Fixed the bug: PNSU SCPI is error by socket to transfer binary file
2. Fixed the bug: SCPI(C4-C1:MEAD? FRR) is error
3. Optimized accessing USB drive so that when a USB drive is moved to a computer, Windows will not prompt a restoration of the USB drive.
4. Fixed the bug: CSV file does not consider probe
5. Fixed the bug of UART decoder with some special settings
6. Fixed the bug: PNSU SCPI is error by socket to transfer binary file
SDS1xx4X-E Firmware Update
バージョン
V6.1.37R10
2023-11-09
バージョンの説明
1. Optimized VGA configuration
SDS1xx4X-E Firmware Update
バージョン
V6.1.37R9
2023-11-09
バージョンの説明
1. Fixed the problem: The skew of the two ADCs is not accuracy for hardware of 09 version (System Status shows Hardware Version: 09-xx). The other hardware version has no this problem.
SDS1xx4X-E Firmware Update
バージョン
V6.1.37R8
2023-11-09
バージョンの説明
1. Fixed the problem: very few SDS1xx4X-e stuck at self-calibration
2. Be Compatible with a new VGA chip
2. Be Compatible with a new VGA chip
SDS1xx4X-E Firmware Update
バージョン
V6.1.37R6
2023-11-09
バージョンの説明
1. Fixed the bug in 6.1.37R2 which cause the WiFi does not work
SDS1xx4X-E Firmware Update
バージョン
V6.1.37R2
2023-11-09
バージョンの説明
1. Added data logger featuring Sample and Measurement Logger functions
2. Added counter function
3. Added Labels
4. Added NTP (Network Time Protocol) and Time Zone. Also requires OS update to SDS1xx4X-E_OSV2 which is located on the SIGLENT product webpage. The OS Update Instructions is also included SDS1xx4X-E_OSV2.zip
5. Modified negative or positive of horizontal delay:STime zero is in trigger. Before trigger, time position is -time (negative delay relative to trigger) and after trigger is +time (positive delay relative to trigger)
6. Fixed a bug with Bin2CSV for ROLL mode
7. Rebuilt Bin2CSV to File Converter which can also convert data logger file to CSV.
8. Fixed a bug: some case there is a blue line on decode bus
9. Fixed a bug with saving hex MSO CSV file
10. FixedSaSbug:SAfterSrebootingS,SBodeSPlotScursorScan’tSbeSmoved
11. Fixed a bug: fine adjusting with customer probe
12. WiFi supported Spaces and Special Characters
2. Added counter function
3. Added Labels
4. Added NTP (Network Time Protocol) and Time Zone. Also requires OS update to SDS1xx4X-E_OSV2 which is located on the SIGLENT product webpage. The OS Update Instructions is also included SDS1xx4X-E_OSV2.zip
5. Modified negative or positive of horizontal delay:STime zero is in trigger. Before trigger, time position is -time (negative delay relative to trigger) and after trigger is +time (positive delay relative to trigger)
6. Fixed a bug with Bin2CSV for ROLL mode
7. Rebuilt Bin2CSV to File Converter which can also convert data logger file to CSV.
8. Fixed a bug: some case there is a blue line on decode bus
9. Fixed a bug with saving hex MSO CSV file
10. FixedSaSbug:SAfterSrebootingS,SBodeSPlotScursorScan’tSbeSmoved
11. Fixed a bug: fine adjusting with customer probe
12. WiFi supported Spaces and Special Characters
SDS1xx4X-E Firmware Update
バージョン
V6.1.35R2
2023-11-09
バージョンの説明
1. Added support for the SAG1021I USB Isolated AWG Module Hardware
2. Fixed the bug: Sometimes PNSU command returns invalid value (Need referring to the latest Program Guide)
3. Added 9 data bits for UART decoding
4. Fixed the bug of UART decoder with some special settings
5. Increased baud rate of UART trigger from 5 Mbps to 20 Mbps
6. FixedStheSbug:STheScommandS‘WF?S AT2’returnsSerrorSlengthSof waveform when digital is enable
7. Fixed the bug: CSV file of waveform has no indication of the trigger point in the data
8. Fixed the bug: After repowering all FFT markers are on justone peak
9. Fixed the bug: After repowering, signal level of CAN trigger can't be recalled
10. Fixed a few SCPI Commands errors:
MATH: CURSOR_VALUE?
C3:INVERT_SET? is missing
HISTORY_LIST? is missing
DIGITAL:LOW8_SWICHT, typo in name
C5:COUPLING? typo in name
11. Fixed the Bode Plot bug: Sometime there isn't enough delay after the scope switches timebase values before it tries to take a measurement
12. Fixed the bug： MatlabScan’tSimportS14SMSMatlabSwaveformSfiles
13. Fixed the bug：‘WF?’commandSignoresStheSlengthSsetSbyS‘WFDU’SforSdigital
2. Fixed the bug: Sometimes PNSU command returns invalid value (Need referring to the latest Program Guide)
3. Added 9 data bits for UART decoding
4. Fixed the bug of UART decoder with some special settings
5. Increased baud rate of UART trigger from 5 Mbps to 20 Mbps
6. FixedStheSbug:STheScommandS‘WF?S AT2’returnsSerrorSlengthSof waveform when digital is enable
7. Fixed the bug: CSV file of waveform has no indication of the trigger point in the data
8. Fixed the bug: After repowering all FFT markers are on justone peak
9. Fixed the bug: After repowering, signal level of CAN trigger can't be recalled
10. Fixed a few SCPI Commands errors:
MATH: CURSOR_VALUE?
C3:INVERT_SET? is missing
HISTORY_LIST? is missing
DIGITAL:LOW8_SWICHT, typo in name
C5:COUPLING? typo in name
11. Fixed the Bode Plot bug: Sometime there isn't enough delay after the scope switches timebase values before it tries to take a measurement
12. Fixed the bug： MatlabScan’tSimportS14SMSMatlabSwaveformSfiles
13. Fixed the bug：‘WF?’commandSignoresStheSlengthSsetSbyS‘WFDU’SforSdigital
バージョンの説明
バージョンの説明
